What should a first-time Salisbury buyer measure before calling?

Measure the longest product, deepest bundle, tallest pack, and maximum weight for each material family. Also record the available room and handling equipment, keeping product dimensions separate from the proposed rack dimensions.

How many uprights does a long bundle need?

The required number depends on length, stiffness, weight distribution, and allowable unsupported span. Provide product details and the shortest pieces you intend to retain; length alone is not enough to choose support spacing.

Can a light assembly shop share one row between raw materials?

Yes, when each assigned position meets the relevant support and capacity requirements. Keep round stock, sheet packs, and loose sections identifiable, and verify that the combined loaded levels remain within each upright's approved total.

Will a taller rack automatically give us more usable storage?

No; usable height also depends on truck reach, bundle clearance, and the permitted loading configuration. Higher levels are only useful when operators can retrieve the material appropriately and the upright total accommodates the planned inventory.

Cantilever Rack system inside a North Carolina warehouse

Salisbury, North Carolina

Cantilever Rack in Salisbury, NC

Cantilever rack in Salisbury stores long products on horizontal arms fixed to vertical uprights, without front columns across the loading face. That structure makes bar, pipe, tube, lumber, and properly supported sheet packs accessible along their length, provided the support spacing matches the material.

For a first warehouse in Salisbury Industrial Park, begin with a measured inventory list rather than a preferred rack height. Specialty manufacturing and light assembly may receive full bundles but return shorter pieces after production, so the storage arrangement must address both conditions before the first purchase.

(704) 480-3833

Cantilever rack fundamentals for a first specification

Think of arm length as the support depth extending from the upright. It should suit the deepest intended load and the manufacturer's loading requirements. The product's length runs along the row, where upright spacing determines the support points beneath it. Those two measurements solve different problems and should not be confused.

Capacity has two checks: the load borne by each arm and the total carried by its upright in the approved configuration. A row of individually suitable arms can still be overloaded through cumulative loading. Clearly presented load plaques help operators understand the supplied arrangement, but they do not replace an accurate inventory weight list.

Single-sided cantilever racking has one loading face; double-sided rows have opposing faces and need appropriate access to both. Selective pallet rack instead provides defined pallet openings and remains useful for boxed supplies or finished goods. Choose the format from the load and picking method rather than appearance or a simple position count.

Load dimensions measured separately

Short pieces receive adequate support

Plaques match the supplied arrangement

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

Salisbury warehouse storage · Cantilever storage rack options

Manufacturing

Food processing

Distribution

Cantilever rack details to settle before ordering

Choose support intervals according to the material's stiffness, not just its overall weight. A light, thin-walled section may require more frequent support than a heavier rigid one. Sheet packs may need a compatible supported surface, and the shortest returned pieces should reach enough supports for their intended placement.

Indoor and outdoor positions need separate consideration. Confirm an appropriate finish for exposure and decide how packaging, moisture, and stored material will be managed. For pipe, review rolling restraint; for loose narrow sections, consider separation and picking access. These measures help control the product but do not increase published component ratings.

The I-85 connection between Charlotte and the Triad makes receiving routes relevant to the layout, but internal handling still controls the working aisle. Preserve transfer room from unloading to the storage face. Keep changes to arm elevations or inventory weights subject to review rather than allowing gradual loading changes to outgrow the original arrangement.

Load dimensions measured separately

Short pieces receive adequate support

Plaques match the supplied arrangement

Call (704) 480-3833

A measured approach to cantilever storage rack

For a new storage area, a few verified measurements are more useful than a large assortment of assumed dimensions. We organize the review around four decisions.

Measure the full stock range

Record maximum length, depth, bundle height, and weight for each product family. Note flexible sections, round material, and sheets separately. Include partial bundles and remnants, since their support needs can differ from intact incoming packs.

Establish the handling method

Provide forklift model, attachment details, lift height, and the longest load it carries. If a side-loader is under consideration, compare its working envelope and transfer approach with the counterbalance arrangement instead of assuming either truck fits.

Allocate the operating space

Show doors, receiving positions, workstations, and clear travel routes. Along Jake Alexander Boulevard, an operation receiving both components and long raw material should reserve distinct set-down areas before placing storage rows into the remaining footprint.

Plan assembly and initial loading

We supply new rack material and manage installation crews whose attendance is scheduled around the agreed site arrangements. Unloading and assembly access are established in advance, followed by a review of product locations and displayed capacities.

Recent Installations

Racking projects completed for warehouses across the Charlotte metro and nearby North and South Carolina communities.

View More Projects

Get a clear starting specification

Share an inventory worksheet, truck information, and a sketch of the available room. Being a division of Warehouse Equipment & Supplies Co., we connect your questions with supplying and installing experience accumulated since 1997, explaining the choices in practical terms. (704) 480-3833.