How should a Matthews manufacturer specify heavy tube bundles?

Submit maximum bundle weight, length, depth, and the expected number stored per level. Describe how the weight is distributed so the review can address individual arm demand as well as the cumulative upright load.

Can one position alternate between lumber and sheet packs?

Only if its support arrangement and ratings accommodate both products. Sheet packs may need closer support or a compatible surface, while lumber dimensions and picking quantities can require different clearances and containment.

Do longer arms always provide more capacity?

No; additional projection can reduce the capacity available from a particular arm design. Select the required depth first, then verify that arm's rating and the upright's allowed loading for the proposed configuration.

What happens when our production team wants another level?

Have the changed arrangement checked before adding it. An extra level increases cumulative upright loading and may alter working clearances, even when every existing arm remains below its individual rating.

Cantilever Rack system inside a North Carolina warehouse

Matthews, North Carolina

Cantilever Rack in Matthews, NC

Cantilever rack in Matthews provides open-front storage through horizontal arms mounted on upright columns. With no front columns between picking positions, long bar, pipe, tube, lumber, and suitably supported sheet bundles can be approached along their length rather than maneuvered through pallet-sized openings.

Specialty manufacturing and building-products operations along the Monroe Road corridor need storage selected for actual material weights. Near Independence Pointe, the same planning conversation should include where bundles arrive, how they reach production, and whether finished orders need a separate staging position away from long-stock retrieval.

(704) 480-3833

Cantilever rack configuration for daily retrieval

For stock moving between Sardis Road North and the US 74 / Independence Boulevard industrial spine, preserve a staging position that does not block the active loading face. Long bundles need room to be set down and identified before a truck enters the storage aisle; that movement belongs on the layout.

Indoor installations should consider clear height and the building's working routes. Outdoor positions require a suitable finish and attention to product exposure, packaging, and water collecting around stored bundles. Confirm whether the material can remain outside before treating exterior space as interchangeable with indoor storage.

Round sections need restraint suited to their tendency to roll, while sheet packs may need supported surfaces or additional support points. Stops, dividers, and compatible decking should be selected with the product in mind. They do not raise arm ratings, and adding accessories does not authorize a higher upright total.

Maximum bundle weights documented

Loaded truck movement reviewed

Approved level arrangement identified

Call (704) 480-3833

Cantilever rack capacity starts at the arm

Choose arm length to match load depth and the support conditions required by the product. A short arm should not be accepted simply because its published capacity looks attractive. Conversely, unnecessary projection makes the storage footprint larger and may reduce the rating available within the selected component range.

Check the demand at each arm before checking the upright total. Both conditions must be satisfied, and the planned combination of loaded levels matters. A stack of heavy sheet material can produce a very different demand from hollow tube bundles occupying an equally large opening. Load plaques should identify the approved capacities.

Cantilever racking differs from selective pallet rack because the arms support long stock without front frame interruptions. Selective storage remains useful for palletized medical-device supplies, packaged parts, and other unit loads. Keeping these functions separate can improve product identification and avoid forcing dissimilar materials into one arrangement.

Maximum bundle weights documented

Loaded truck movement reviewed

Approved level arrangement identified

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

Matthews warehouse storage · Cantilever storage rack options

Wholesale distribution

Building products

Light manufacturing

Cantilever storage rack planning for heavy bundles

A useful proposal identifies the controlling load rather than averaging all inventory together. We review the heavier and more awkward items before developing the storage arrangement.

Build a weight-based inventory list

Give maximum bundle weights, dimensions, and the number of bundles expected at each level. Identify any sections with uneven weight distribution, and include the short remnants that production returns after full-length material is cut.

Check supports and usable openings

Determine how many uprights each product needs along its length. Set vertical openings around bundle height, fork entry, and retrieval clearance instead of packing levels tightly enough that operators must drag loads from beneath adjacent arms.

Compare access from either side

Review single-sided perimeter storage against double-sided rows. Use forklift specifications and loaded turning dimensions to verify both approaches; if considering a side-loader, examine its transfer movement and lifting reach rather than assuming its travel direction resolves every constraint.

Prepare the handover sequence

We furnish new components, then schedule installation crews and oversee their work within the agreed operating area. Before storage begins, the completed arrangement is reviewed with its load plaques and intended product assignments.

Recent Installations

Racking projects completed for warehouses across the Charlotte metro and nearby North and South Carolina communities.

View More Projects

Price the configuration your inventory requires

Provide your heaviest sections, expected stock mix, and available working dimensions. We operate as a division of Warehouse Equipment & Supplies Co., drawing on a supplying and installing history that began in 1997 when discussing your material-handling requirements. (704) 480-3833.