Cantilever Rack in Kannapolis, NC
Cantilever rack in Kannapolis creates defined storage for long components that do not fit ordinary pallet openings. Supporting arms attach to uprights without front columns, allowing access along the load face. Bar, pipe, tube, lumber, and sheets each need support selected for their dimensions, weight, and handling method.
Near the NC Research Campus, life sciences and medical-device support operations make location identification especially important. Component distribution along Lane Street also benefits from keeping long stock separate from small-item picking. Our operation is a division of Warehouse Equipment & Supplies Co.; supplying and installing since 1997 informs how we connect material selection with daily handling.
Cantilever rack details for controlled component flow
Arm capacity is not the same as a whole-level allowance. A bundle spanning several arms may distribute weight unevenly, particularly when supports or packaging differ. Supply the heaviest credible loading pattern, including partial bundles, so component ratings are evaluated against actual handling rather than an assumed equal split.
Indoor storage may suit packaged medical-device components, while an outdoor location presents exposure concerns for both rack finish and material protection. A rack alone does not establish cleanliness or ESD controls. Around the NC Research Campus, those operational requirements should remain explicit inputs from the facility rather than implied product features.
Selective pallet rack remains appropriate for boxed components and palletized replenishment. Position open-arm storage where long material can be retrieved without crossing every small-parts picking route. At Lane Street facilities, distinguish incoming inspection, released inventory, and returns using assigned locations and signs that do not obscure load information.
Cantilever storage rack with clear inventory locations
Cantilever racking suits materials whose length makes selective pallet openings awkward. An unobstructed front allows a handler to approach several arms supporting the same bundle. That access does not remove the need for stable placement: stock must bear correctly on its supports, with its weight distributed as the specified configuration requires.
For component handling near Kannapolis Parkway, define locations by row, face, upright section, and level. Labels should remain visible when a bundle is present. Keep different material grades or release statuses physically distinguishable rather than relying on an operator to recognize similar-looking tube or bar during a busy replenishment cycle.
Single-face configurations can place long stock along a boundary; double-face rows support access from two working aisles. Neither arrangement replaces a traffic review. Where components move toward controlled work areas, establish the transfer point separately and confirm any packaging or handling restrictions with the facility team.
Operations We Rack Around Here
Kannapolis warehouse storage · Cantilever storage rack options
Developing a cantilever rack specification
The planning sequence connects inventory accuracy with physical support. We begin with the material record, then examine the equipment and installation area rather than choosing arms from a photograph.
Build a component profile
Provide lengths, bundle depths, maximum weights, and identification requirements. Include short production remnants and sheet packs, plus any protective separators needed to prevent contact between finished surfaces and supporting steel.
Determine support geometry
Select arm length around the complete load depth and set upright spacing around material stiffness. Check the rating of each arm, then review the combined loading carried by each upright across every intended level.
Test access and identification
Plot the forklift or side-loader route with its longest load. Review approach space, scanner visibility, and the handoff to assembly so a storage location does not occupy the same area needed for component verification.
Organize the installation work
Installation crews are scheduled by us, with their activity managed against the agreed site sequence. New material, position labeling, and configuration-specific load plaques are included in the installation discussion before the area enters service.
Recent Installations
Racking projects completed for warehouses across the Charlotte metro and nearby North and South Carolina communities.
Discuss a Kannapolis cantilever rack arrangement
Share your component list, location naming format, available area, and handling equipment details. We can then discuss a new-material arrangement that supports long stock without confusing inventory status or transfer routes. (704) 480-3833.
Charlotte Pallet Rack
1515 Mockingbird Ln
Ste 200A
Charlotte, NC 28209
(704) 480-3833Monday - Friday: 8:00 AM - 6:00 PM
Practical questions for component storage
Other Rack Types We Supply in Kannapolis
Pallet Rack
Every pallet reachable, every time. The baseline we size everything else against.
View details
Pushback Rack
Two to six pallets deep from one aisle, without giving up much reach.
View details
Pallet Flow Rack
Load one side, pick the other, and let gravity enforce first in, first out.
View details
Drive-In Rack
Deep reserve lanes with forklift entry for repeated pallets, trading individual access for fewer aisles.
View details
Carton Flow Rack
Cases advance to the picker instead of the picker hunting for cases.
View detailsNearby Areas We Also Serve
Across Dale Earnhardt Boulevard and the I-85 industrial spine, cantilever rack layouts should connect component receiving with identifiable storage and deliberate assembly transfers.
Where We Work
Located in Charlotte, NC, we serve the entire Charlotte metro with industrial pallet racks and warehouse storage solutions.
Charlotte Pallet Rack
Address
1515 Mockingbird Ln
Ste 200A
Charlotte, NC 28209
Phone
(704) 480-3833Business Hours
Monday - Friday: 8:00 AM - 6:00 PM
Saturday: Closed
Sunday: Closed
Need Cantilever Rack in Kannapolis?
Talk through your inventory format and long-material requirements at (704) 480-3833.