---
title: "Cantilever Rack in Mooresville, NC | Long Stock Access"
url: https://charlottepalletrack.com/service-area/mooresville/cantilever-rack
description: "Support Mooresville racing, marine, and assembly materials with new cantilever storage. Review arms and installation at (704) 480-3833."
lang: en
---

Image: Cantilever Rack system inside a North Carolina warehouse (https://charlottepalletrack.com/__l5e/assets-v1/90b5532b-c840-4bd9-9bf4-f3270aef7e37/cantilever-hero.jpg)

Mooresville, North Carolina

# Cantilever Rack in Mooresville, NC

Cantilever rack in Mooresville puts long fabrication materials on projecting arms rather than behind front columns. Uprights carry those arms, leaving the loading face open for bar, pipe, tube, lumber, and suitably supported sheets. Selecting the support arrangement starts with material behavior and bundle weight, not just available wall length.

Motorsports and marine operations make long-stock handling relevant around Mazeppa Road industrial and Lakeside Business Park. Light assembly teams also need room to receive material while production continues. Supplying and installing since 1997, our division of Warehouse Equipment & Supplies Co. brings those storage and handling questions into the same planning conversation.

(704) 480-3833

## Cantilever racking for racing and marine materials

A cantilever rack allows long bundles to span multiple arms without front columns dividing the approach. Compared with selective pallet rack, it offers a more direct loading face for lengthy stock. Selective positions still make sense for palletized assemblies, packaged accessories, and cartons that do not need open-arm support.

Material differences should shape the specification. Thin-wall tube may deflect across gaps that heavier sections bridge readily. Sheet packs need support suited to their dimensions and stiffness, while lumber depth can vary between bundles. Protective contact surfaces may be appropriate for finished material, but they do not change the rated capacity.

Along the NC 150 corridor, consider how material will travel from receiving into assembly rather than placing storage wherever floor area remains. Single-face rows work from one side; double-face rows provide two accessible faces. A central arrangement only helps when each approach leaves sufficient space for the truck and its longest carried load.

Support spacing for flexible material

Bundle depth within arm length

Receiving route clear during assembly

Image: Cantilever warehouse racking holding steel tubing (https://charlottepalletrack.com/__l5e/assets-v1/b98c5116-754b-4aa2-9ef4-8386cdbe13f1/cantilever-2b.jpg)

Image: Cantilever rack storing lumber and wood products (https://charlottepalletrack.com/__l5e/assets-v1/3cc1b1fb-22ae-4b9c-8881-de7c00231227/cantilever-3b.jpg)

### Operations We Rack Around Here

Mooresville warehouse storage: https://charlottepalletrack.com/service-area/mooresville
·
Cantilever storage rack options: https://charlottepalletrack.com/products/cantilever-rack

Advanced manufacturing

Motorsports support

Consumer products

## Cantilever storage rack choices for mixed stock

Keep dense bar and lighter tubing in identified positions rather than filling any open level. Similar bundle sizes do not mean equal weight. If part of a bundle is removed, the remaining material still needs stable support; short offcuts should not be balanced across an unsuitable gap between arms.

For indoor areas at Mooresville Business Park, compare rack height with clear handling reach and the truck's capacity at the required lift. Outdoor applications need separate consideration of finish, weather exposure, and stored-material protection. Exterior placement does not remove the need for a planned access lane and controlled loading positions.

Arm end stops may help retain round material when selected for the application, but they are not a substitute for correct handling. Do not let stock project past the intended support depth. Keep load plaques legible, and request a review before rearranging arms or introducing heavier bundles into an established storage pattern.

Support spacing for flexible material

Bundle depth within arm length

Receiving route clear during assembly

Call (704) 480-3833: (704) 480-3833

## Cantilever rack planning from bundle to installation

A useful proposal distinguishes material positions, handling clearances, and responsibilities before purchasing. The following sequence keeps those decisions connected as an empty area becomes a working storage zone.

1

### Describe production stock

List full lengths, maximum bundle weights, load depths, and smallest retained offcuts. Identify marine sheet material, racing tube, or other stock that needs extra support or separation from adjacent material families.

2

### Set the support layout

Choose arm length to accommodate load depth and space uprights for the material being carried. Assess the load rating of each arm together with the total loading on its upright, including all planned storage levels.

3

### Walk the handling route

Check dock access, receiving turns, and the approach to production. Compare conventional forklift handling with side-loader access using actual equipment information, especially where a long bundle must pass through a confined transition.

4

### Arrange managed installation

Our team schedules the installation crews and manages the agreed work sequence around receiving activity. We supply new material and review configuration-specific load plaques with the completed arrangement so operating limits remain available to handlers.

## Recent Installations

Racking projects completed for warehouses across the Charlotte metro and nearby North and South Carolina communities.

Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/9e6d591a-1b42-4328-8d0c-3ff129072082/project-orange-blue-rack.jpg)

Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/e271d582-2fce-4cff-97da-462ddab27097/project-blue-tall-rack.jpg)

Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/ec5ca081-4183-457a-914c-fb74a5815fa2/project-dc-aisle.jpg)

Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/9bee7a3e-6b3b-4d2b-8863-c37f0e1dd966/project-distribution-center.jpg)

Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/880d5178-c293-49a2-82ae-3365f0c1628c/project-drive-in.jpg)

Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/91e4b43a-9eb0-4105-9d30-657028a00c91/project-loaded-aisle.jpg)

Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/e1312ce4-7800-4267-82fd-dd273b917f2a/project-igt-install.jpg)

Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/259a43d6-5be8-4f8e-920d-5c0dcdcf44a4/project-wire-deck.jpg)

Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/aa0a820f-d334-4983-9a3f-a2435e8bb4aa/project-shelving-bays.jpg)

Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/b572c5bc-8d66-4163-afa0-d13a2eb10eef/project-green-orange-rack.jpg)

View More Projects: https://charlottepalletrack.com/projects

## Scope a Mooresville cantilever rack arrangement

Bring your stock list, receiving-area dimensions, truck details, and production handoff locations. We will use those inputs to discuss new components and an installation sequence suited to the way material enters the building. (704) 480-3833.

### Charlotte Pallet Rack

1515 Mockingbird Ln

Ste 200A

Charlotte, NC 28209

(704) 480-3833

Monday - Friday: 8:00 AM - 6:00 PM

## Questions from racing, marine, and assembly buyers

### Can Mooresville racing tube and marine sheet packs share a row?

### How should we store fabrication offcuts?

### Is outdoor cantilever racking suitable for lumber near receiving?

### What information helps plan installation around inbound material?

## Other Rack Types We Supply in Mooresville

### Pallet Rack

Every pallet reachable, every time. The baseline we size everything else against.

View details
https://charlottepalletrack.com/service-area/mooresville

### Pushback Rack

Two to six pallets deep from one aisle, without giving up much reach.

View details
https://charlottepalletrack.com/service-area/mooresville/pushback-rack

### Pallet Flow Rack

Load one side, pick the other, and let gravity enforce first in, first out.

View details
https://charlottepalletrack.com/service-area/mooresville/pallet-flow-rack

### Drive-In Rack

Deep reserve lanes with forklift entry for repeated pallets, trading individual access for fewer aisles.

View details
https://charlottepalletrack.com/service-area/mooresville/drive-in-rack

### Carton Flow Rack

Cases advance to the picker instead of the picker hunting for cases.

View details
https://charlottepalletrack.com/service-area/mooresville/carton-flow-rack

Warehouse Relocation in Mooresville →: https://charlottepalletrack.com/service-area/mooresville/warehouse-relocation

## Nearby Areas We Also Serve

Between Lakeside Business Park and the I-77 / Exit 36 corridor, cantilever rack layouts can connect receiving space with long-material supply for assembly.

Cantilever Rack in Charlotte: https://charlottepalletrack.com/service-area/charlotte/cantilever-rack
Cantilever Rack in Concord: https://charlottepalletrack.com/service-area/concord/cantilever-rack
Cantilever Rack in Gastonia: https://charlottepalletrack.com/service-area/gastonia/cantilever-rack
Cantilever Rack in Huntersville: https://charlottepalletrack.com/service-area/huntersville/cantilever-rack
Cantilever Rack in Matthews: https://charlottepalletrack.com/service-area/matthews/cantilever-rack
Cantilever Rack in Monroe: https://charlottepalletrack.com/service-area/monroe/cantilever-rack

View All Service Areas: https://charlottepalletrack.com/service-area

## Where We Work

Located in Charlotte, NC, we serve the entire Charlotte metro with industrial pallet racks and warehouse storage solutions.

### Charlotte Pallet Rack

#### Address

1515 Mockingbird Ln
Ste 200A
Charlotte, NC 28209

#### Phone

(704) 480-3833

#### Business Hours

Monday - Friday: 8:00 AM - 6:00 PM
Saturday: Closed
Sunday: Closed

## Need Cantilever Rack in Mooresville?

Discuss your next long-stock storage arrangement by calling (704) 480-3833.

(704) 480-3833

Tap to Call: (704) 480-3833

## Structured data

```json
[
  {
    "@context": "https://schema.org",
    "@graph": [
      {
        "@type": "LocalBusiness",
        "@id": "https://charlottepalletrack.com/#business",
        "name": "Charlotte Pallet Rack",
        "url": "https://charlottepalletrack.com",
        "telephone": "(704) 480-3833",
        "address": {
          "@type": "PostalAddress",
          "streetAddress": "1515 Mockingbird Ln, Ste 200A",
          "addressLocality": "Charlotte",
          "addressRegion": "NC",
          "postalCode": "28209",
          "addressCountry": "US"
        },
        "hasMap": "https://maps.google.com/maps?cid=3791448016980164287&output=embed",
        "areaServed": {
          "@type": "City",
          "name": "Mooresville",
          "containedInPlace": {
            "@type": "State",
            "name": "North Carolina"
          }
        },
        "parentOrganization": {
          "@type": "Organization",
          "name": "Warehouse Equipment & Supplies Co.",
          "url": "https://www.warehouseequipmentsite.com"
        }
      },
      {
        "@type": "Service",
        "@id": "https://charlottepalletrack.com/service-area/mooresville/cantilever-rack#service",
        "name": "Cantilever Rack in Mooresville, NC",
        "serviceType": "Cantilever Rack in Mooresville, NC",
        "description": "Support Mooresville racing, marine, and assembly materials with new cantilever storage. Review arms and installation at (704) 480-3833.",
        "url": "https://charlottepalletrack.com/service-area/mooresville/cantilever-rack",
        "provider": {
          "@id": "https://charlottepalletrack.com/#business"
        },
        "areaServed": {
          "@type": "City",
          "name": "Mooresville",
          "containedInPlace": {
            "@type": "State",
            "name": "North Carolina"
          }
        }
      }
    ]
  },
  {
    "@context": "https://schema.org",
    "@type": "LocalBusiness",
    "@id": "https://charlottepalletrack.com/#business",
    "name": "Charlotte Pallet Rack",
    "alternateName": "Charlotte Pallet Rack - A Division of Warehouse Equipment & Supplies Co.",
    "description": "Industrial pallet racks and warehouse racking solutions in Charlotte, NC. Free warehouse design consultations, pallet rack installation, and storage optimization services across the Charlotte metro.",
    "url": "https://charlottepalletrack.com",
    "telephone": "(704) 480-3833",
    "address": {
      "@type": "PostalAddress",
      "streetAddress": "1515 Mockingbird Ln, Ste 200A",
      "addressLocality": "Charlotte",
      "addressRegion": "NC",
      "postalCode": "28209",
      "addressCountry": "US"
    },
    "geo": {
      "@type": "GeoCoordinates",
      "latitude": "35.2271",
      "longitude": "-80.8431"
    },
    "areaServed": {
      "@type": "City",
      "name": "Mooresville",
      "containedInPlace": {
        "@type": "State",
        "name": "North Carolina"
      }
    },
    "openingHoursSpecification": [
      {
        "@type": "OpeningHoursSpecification",
        "dayOfWeek": [
          "Monday",
          "Tuesday",
          "Wednesday",
          "Thursday",
          "Friday"
        ],
        "opens": "08:00",
        "closes": "17:00"
      }
    ],
    "priceRange": "$$",
    "paymentAccepted": "Cash, Credit Card, Check",
    "image": "https://charlottepalletrack.com/images/logo.png",
    "sameAs": [
      "https://facebook.com/charlottepalletrack",
      "https://linkedin.com/company/charlottepalletrack",
      "https://instagram.com/charlottepalletrack"
    ],
    "hasOfferCatalog": {
      "@type": "OfferCatalog",
      "name": "Pallet Rack Systems",
      "itemListElement": [
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Selective Pallet Rack Systems"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Push Back Pallet Rack Systems"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Drive-In Pallet Rack Systems"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Warehouse Design Consultation"
          }
        },
        {
          "@type": "Offer",
          "itemOffered": {
            "@type": "Service",
            "name": "Pallet Rack Installation"
          }
        }
      ]
    }
  },
  {
    "@context": "https://schema.org",
    "@type": "BreadcrumbList",
    "itemListElement": [
      {
        "@type": "ListItem",
        "position": 1,
        "name": "Home",
        "item": "https://charlottepalletrack.com/"
      },
      {
        "@type": "ListItem",
        "position": 2,
        "name": "Service Area",
        "item": "https://charlottepalletrack.com/service-area"
      },
      {
        "@type": "ListItem",
        "position": 3,
        "name": "Mooresville",
        "item": "https://charlottepalletrack.com/service-area/mooresville"
      },
      {
        "@type": "ListItem",
        "position": 4,
        "name": "Cantilever Rack",
        "item": "https://charlottepalletrack.com/service-area/mooresville/cantilever-rack"
      }
    ]
  },
  {
    "@context": "https://schema.org",
    "@type": "FAQPage",
    "mainEntity": [
      {
        "@type": "Question",
        "name": "Can Mooresville racing tube and marine sheet packs share a row?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "Yes, if each has a suitable assigned support arrangement. Tube and sheet packs may need different arm spacing or surfaces, and their combined demand must remain within the applicable upright loading limits."
        }
      },
      {
        "@type": "Question",
        "name": "How should we store fabrication offcuts?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "Give them positions that support their actual lengths. Establish a minimum retained size and a separate location for shorter pieces rather than placing remnants across arms intended only for full-length stock."
        }
      },
      {
        "@type": "Question",
        "name": "Is outdoor cantilever racking suitable for lumber near receiving?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "It can be, with a system selected for the exposure and load. Discuss the finish, bundle protection, loading surface conditions, and truck approach before treating an exterior area as overflow storage."
        }
      },
      {
        "@type": "Question",
        "name": "What information helps plan installation around inbound material?",
        "acceptedAnswer": {
          "@type": "Answer",
          "text": "Provide receiving hours, door assignments, staging boundaries, and the areas that must stay accessible. Those details allow the work sequence to be discussed without assuming the entire receiving zone can be closed."
        }
      }
    ]
  }
]
```