--- title: "Carton Flow Rack in Kannapolis, NC | Case Picking" url: https://charlottepalletrack.com/service-area/kannapolis/carton-flow-rack description: "Kannapolis carton flow rack for component and medical-device picks, with FIFO lanes and tote checks. Call (704) 480-3833." lang: en --- Image: Carton Flow Rack system inside a North Carolina warehouse (https://charlottepalletrack.com/__l5e/assets-v1/d8101084-1d24-42fc-bc5a-eb546281ef83/carton-flow-hero.jpg) Kannapolis, North Carolina # Carton Flow Rack in Kannapolis, NC Carton flow rack in Kannapolis can organize repeated withdrawals of component cases and totes into a visible front-facing sequence. Inclined roller channels bring the next container forward while rear replenishment preserves a separate route for incoming stock and keeps the picker at the assigned address. The Lane Street corridor and Kannapolis Parkway connect with the I-85 industrial spine in Cabarrus County. Component distribution, medical devices, and light assembly call for careful SKU separation, especially when similar containers hold items with different identifiers or release instructions. (704) 480-3833 ## Specifying a Kannapolis case flow rack module Product identity and package behavior guide the layout before components are selected. 1 ### Define stock separation Provide SKU, lot, or revision rules relevant to forward picking. Distinguish receipt-order rotation from release priority, and mark which products must never share an assigned channel despite using similar containers. 2 ### Demonstrate container travel Trial loaded small cases and the totes used in normal assembly support. Observe starting movement, continuous roller contact, and withdrawal after partial depletion rather than accepting an empty-container demonstration. 3 ### Check the existing support A pallet rack bay retrofit requires the rack family, connections, span, and level arrangement to be reviewed. Reserve enough opening above the insert for reading identification and removing the largest working pack. 4 ### Set the installation boundary Experienced installation crews we schedule and manage work to agreed access and staging arrangements. Separate the work area from active component issue, and define which picking faces remain available during each installation stage. ## Carton flow racking with clear SKU boundaries A divided lane should carry one approved product assignment at a time. FIFO front picking and back restocking preserve physical receipt sequence, but they do not replace batch identification or release instructions. Where lots require separate treatment, allocate channels or maintain another controlled storage method. Inclined rollers must suit the underside of the cases and totes in the module. Small rigid containers may have feet or ribs that interrupt contact, while light cartons may not travel as expected on a setting selected for heavier packs. Test the real loaded range before finalizing the bed. Carton flow rack width depends on the working package and its handling clearance. Dividers should maintain a straight path and a clear address without compressing labels or bowed carton sides. Include the removal movement at the front when checking whether adjacent channels leave practical room. Product identity at both ends Loaded tote bases assessed Separate lot assignments where needed Image: Carton flow rack with gravity wheel beds and case lanes (https://charlottepalletrack.com/__l5e/assets-v1/40907050-7b75-417f-b4a6-6ac621d62446/carton-flow-rack.jpg) Image: Carton flow shelving in use on a warehouse pick line (https://charlottepalletrack.com/__l5e/assets-v1/d8101084-1d24-42fc-bc5a-eb546281ef83/carton-flow-hero.jpg) ### Operations We Rack Around Here Kannapolis warehouse storage: https://charlottepalletrack.com/service-area/kannapolis · Carton flow system options: https://charlottepalletrack.com/products/carton-flow-rack · Pallet flow reserve storage: https://charlottepalletrack.com/service-area/kannapolis/pallet-flow-rack · Pushback reserve storage: https://charlottepalletrack.com/service-area/kannapolis/pushback-rack Life-sciences support Distribution Advanced manufacturing ## Case flow rack as one part of order handling Pick modules should place repeat products within a sensible route to assembly or consolidation. Order-picking speed depends on avoiding search and unnecessary movement, but stock identity cannot be sacrificed to shorten the path. A clear label and a correctly assigned case matter as much as frontage. For Kannapolis, this site operates as a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997. Proposals specify new material, lane accessories, supporting rack requirements, and the installation scope, making the intended package and operating assumptions explicit before the order is placed. Pallet flow and pushback address reserve pallet inventory rather than individual case selection. The former supports rear-to-front whole-load movement; the latter stores and retrieves at one face. Decide how reserve pallets are broken into replenishment cases before linking those areas with the component pick module. Product identity at both ends Loaded tote bases assessed Separate lot assignments where needed Call (704) 480-3833: (704) 480-3833 ## Recent Installations Racking projects completed for warehouses across the Charlotte metro and nearby North and South Carolina communities. Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/9e6d591a-1b42-4328-8d0c-3ff129072082/project-orange-blue-rack.jpg) Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/e271d582-2fce-4cff-97da-462ddab27097/project-blue-tall-rack.jpg) Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/ec5ca081-4183-457a-914c-fb74a5815fa2/project-dc-aisle.jpg) Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/9bee7a3e-6b3b-4d2b-8863-c37f0e1dd966/project-distribution-center.jpg) Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/880d5178-c293-49a2-82ae-3365f0c1628c/project-drive-in.jpg) Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/91e4b43a-9eb0-4105-9d30-657028a00c91/project-loaded-aisle.jpg) Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/e1312ce4-7800-4267-82fd-dd273b917f2a/project-igt-install.jpg) Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/259a43d6-5be8-4f8e-920d-5c0dcdcf44a4/project-wire-deck.jpg) Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/aa0a820f-d334-4983-9a3f-a2435e8bb4aa/project-shelving-bays.jpg) Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/b572c5bc-8d66-4163-afa0-d13a2eb10eef/project-green-orange-rack.jpg) View More Projects: https://charlottepalletrack.com/projects ## Discuss Kannapolis component presentation Send container samples, identification rules, demand by order line, and the existing rack dimensions. A carton flow rack quote should explain how forward channels support accurate selection as well as routine restocking. Review your case-handling requirements at (704) 480-3833. ### Charlotte Pallet Rack 1515 Mockingbird Ln Ste 200A Charlotte, NC 28209 (704) 480-3833 Monday - Friday: 8:00 AM - 6:00 PM ## Kannapolis case-picking questions ### Can Kannapolis component lanes hold several lots? ### What should we measure on a small tote? ### Can labeling be integrated with the lane plan? ### What establishes the supporting rack capacity? ## Other Rack Types We Supply in Kannapolis ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://charlottepalletrack.com/service-area/kannapolis ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://charlottepalletrack.com/service-area/kannapolis/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://charlottepalletrack.com/service-area/kannapolis/pallet-flow-rack ### Drive-In Rack Deep reserve lanes with forklift entry for repeated pallets, trading individual access for fewer aisles. View details https://charlottepalletrack.com/service-area/kannapolis/drive-in-rack ### Cantilever Rack Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold. View details https://charlottepalletrack.com/service-area/kannapolis/cantilever-rack Warehouse Relocation in Kannapolis →: https://charlottepalletrack.com/service-area/kannapolis/warehouse-relocation ## Nearby Areas We Also Serve Kannapolis and adjacent Cabarrus case-handling layouts are planned with separate product-identity and container requirements for each location. Carton Flow Rack in Charlotte: https://charlottepalletrack.com/service-area/charlotte/carton-flow-rack Carton Flow Rack in Concord: https://charlottepalletrack.com/service-area/concord/carton-flow-rack Carton Flow Rack in Gastonia: https://charlottepalletrack.com/service-area/gastonia/carton-flow-rack Carton Flow Rack in Huntersville: https://charlottepalletrack.com/service-area/huntersville/carton-flow-rack Carton Flow Rack in Mooresville: https://charlottepalletrack.com/service-area/mooresville/carton-flow-rack Carton Flow Rack in Matthews: https://charlottepalletrack.com/service-area/matthews/carton-flow-rack View All Service Areas: https://charlottepalletrack.com/service-area ## Where We Work Located in Charlotte, NC, we serve the entire Charlotte metro with industrial pallet racks and warehouse storage solutions. ### Charlotte Pallet Rack #### Address 1515 Mockingbird Ln Ste 200A Charlotte, NC 28209 #### Phone (704) 480-3833 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Carton Flow Rack in Kannapolis? Bring the actual container bases and stock-separation rules to your forward-pick review. (704) 480-3833 Tap to Call: (704) 480-3833 ## Structured data ```json [ { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://charlottepalletrack.com/#business", "name": "Charlotte Pallet Rack", "url": "https://charlottepalletrack.com", "telephone": "(704) 480-3833", "address": { "@type": "PostalAddress", "streetAddress": "1515 Mockingbird Ln, Ste 200A", "addressLocality": "Charlotte", "addressRegion": "NC", "postalCode": "28209", "addressCountry": "US" }, "hasMap": "https://maps.google.com/maps?cid=3791448016980164287&output=embed", "areaServed": { "@type": "City", "name": "Kannapolis", "containedInPlace": { "@type": "State", "name": "North Carolina" } }, "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com" } }, { "@type": "Service", "@id": "https://charlottepalletrack.com/service-area/kannapolis/carton-flow-rack#service", "name": "Carton Flow Rack in Kannapolis, NC", "serviceType": "Carton Flow Rack in Kannapolis, NC", "description": "Kannapolis carton flow rack for component and medical-device picks, with FIFO lanes and tote checks. Call (704) 480-3833.", "url": "https://charlottepalletrack.com/service-area/kannapolis/carton-flow-rack", "provider": { "@id": "https://charlottepalletrack.com/#business" }, "areaServed": { "@type": "City", "name": "Kannapolis", "containedInPlace": { "@type": "State", "name": "North Carolina" } } } ] }, { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://charlottepalletrack.com/#business", "name": "Charlotte Pallet Rack", "alternateName": "Charlotte Pallet Rack - A Division of Warehouse Equipment & Supplies Co.", "description": "Industrial pallet racks and warehouse racking solutions in Charlotte, NC. Free warehouse design consultations, pallet rack installation, and storage optimization services across the Charlotte metro.", "url": "https://charlottepalletrack.com", "telephone": "(704) 480-3833", "address": { "@type": "PostalAddress", "streetAddress": "1515 Mockingbird Ln, Ste 200A", "addressLocality": "Charlotte", "addressRegion": "NC", "postalCode": "28209", "addressCountry": "US" }, "geo": { "@type": "GeoCoordinates", "latitude": "35.2271", "longitude": "-80.8431" }, "areaServed": { "@type": "City", "name": "Kannapolis", "containedInPlace": { "@type": "State", "name": "North Carolina" } }, "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "17:00" } ], "priceRange": "$$", "paymentAccepted": "Cash, Credit Card, Check", "image": "https://charlottepalletrack.com/images/logo.png", "sameAs": [ "https://facebook.com/charlottepalletrack", "https://linkedin.com/company/charlottepalletrack", "https://instagram.com/charlottepalletrack" ], "hasOfferCatalog": { "@type": "OfferCatalog", "name": "Pallet Rack Systems", "itemListElement": [ { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Selective Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Push Back Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Drive-In Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Warehouse Design Consultation" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Pallet Rack Installation" } } ] } }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://charlottepalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://charlottepalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Kannapolis", "item": "https://charlottepalletrack.com/service-area/kannapolis" }, { "@type": "ListItem", "position": 4, "name": "Carton Flow Rack", "item": "https://charlottepalletrack.com/service-area/kannapolis/carton-flow-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can Kannapolis component lanes hold several lots?", "acceptedAnswer": { "@type": "Answer", "text": "They can only when your handling instructions allow that physical sequence. FIFO follows loading order; separate lots or release priorities need suitable addresses and replenishment instructions rather than an assumption that the rollers select the correct batch." } }, { "@type": "Question", "name": "What should we measure on a small tote?", "acceptedAnswer": { "@type": "Answer", "text": "Record its loaded footprint, base ribs or feet, weight range, and removal clearance. The outside rectangle alone does not show which surfaces touch the rollers or whether the tote remains stable while partly emptied." } }, { "@type": "Question", "name": "Can labeling be integrated with the lane plan?", "acceptedAnswer": { "@type": "Answer", "text": "Yes; define readable addresses on the front and rear with the layout. Keep labels visible when cases are present, and connect each replenishment address with the corresponding picking position to reduce assignment errors." } }, { "@type": "Question", "name": "What establishes the supporting rack capacity?", "acceptedAnswer": { "@type": "Answer", "text": "Review the complete arrangement rather than quoting one capacity figure. Beam ratings apply per pair per level, and frame ratings depend on height and beam spacing; load plaques should reflect the approved configuration with the flow stock included." } } ] } ] ```