--- title: "Cantilever Rack in Charlotte, NC | Long Material" url: https://charlottepalletrack.com/service-area/charlotte/cantilever-rack description: "Plan Charlotte long-material storage around load weights, arm spacing and forklift access. Call (704) 480-3833 for new rack and installation." lang: en --- Image: Cantilever Rack system inside a North Carolina warehouse (https://charlottepalletrack.com/__l5e/assets-v1/90b5532b-c840-4bd9-9bf4-f3270aef7e37/cantilever-hero.jpg) Charlotte, North Carolina # Cantilever Rack in Charlotte, NC Cantilever rack in Charlotte gives long materials an open loading face rather than forcing them between front columns. Arms project from uprights to support bar, pipe, tube, lumber and supported sheet packs. Start with the longest bundle and heaviest individual load, then match the arrangement to how operators actually receive and retrieve material. Around Westinghouse Boulevard, a textile-support operation may need separate locations for maintenance tubing and fabrication stock. In Steele Creek, third-party logistics buildings may combine long goods with palletized shipments. Those differences affect rack placement, travel paths and whether long-load handling should share space with ordinary pallet movements. (704) 480-3833 ## Cantilever rack for mixed Charlotte inventories The open front makes horizontal placement possible without threading stock through a beam opening. Upright spacing still matters: flexible material needs enough support points to limit sag, while rigid bundles require a support arrangement suited to their length and weight distribution. Record short remnants separately rather than assuming every piece spans the same arms. Arm length follows load depth, not the overall length of a pipe or board. The material must sit within the approved support arrangement without excessive forward projection. Each arm needs an appropriate load rating, and the upright total must accommodate the combined loading at its installed levels. Dividing bundle weight equally is only appropriate when support conditions justify it. Single-face rows can serve perimeter locations; double-face rows provide access from opposing aisles. Neither arrangement determines aisle width by itself. Compare the forklift, attachment, load length and turning path before assigning space. Selective pallet rack remains the better fit for palletized cartons, while cantilever racking addresses stock that needs an unobstructed horizontal opening. Longest-load turning path Arm and upright capacities Indoor or outdoor exposure Image: Cantilever warehouse racking holding steel tubing (https://charlottepalletrack.com/__l5e/assets-v1/b98c5116-754b-4aa2-9ef4-8386cdbe13f1/cantilever-2b.jpg) Image: Cantilever rack storing lumber and wood products (https://charlottepalletrack.com/__l5e/assets-v1/3cc1b1fb-22ae-4b9c-8881-de7c00231227/cantilever-3b.jpg) ### Operations We Rack Around Here Charlotte warehouse storage: https://charlottepalletrack.com/service-area/charlotte · Cantilever storage rack options: https://charlottepalletrack.com/products/cantilever-rack Regional distribution Third-party logistics Consumer goods ## Planning cantilever rack around material movement A useful layout connects inventory measurements with receiving, storage and retrieval. We supply new material and schedule and manage installation crews around the agreed work areas. 1 ### Document the load range List bundle lengths, depths, weights and quantities by material family. Include loose pieces, banded packs and partial bundles. Note whether operators lift beneath the entire bundle or need clearance for slings or other approved handling attachments. 2 ### Set support positions Choose upright spacing and arm lengths from the material's support requirements. Check each arm rating alongside the upright total. Reserve vertical clearance for lifting stock free without striking the next level or dragging across adjacent material. 3 ### Trace equipment access Show the full load envelope through intersections and turns. A side-loader may handle long stock differently from a counterbalance forklift. Near the I-85 / I-77 freight interchange, receiving activity also makes dedicated unloading and temporary staging areas worth identifying. 4 ### Coordinate the handover Review row locations, installation access and material delivery arrangements before work begins. Confirm the installed configuration and load plaques before loading. Give operators a location plan that distinguishes material types and identifies any restricted storage positions. ## Cantilever rack capacities and working conditions Do not treat an arm rating as permission to place that weight anywhere along the arm. Loading assumptions, approved placement and the selected components must agree. Concentrated contact or an off-center bundle can change the demand on individual supports. Communicate unusual loads before selecting the system. Indoor layouts need clearance around doors, lighting and overhead obstructions. Outdoor storage adds exposure, drainage and material-protection considerations; specify an appropriate finish and confirm that the proposed configuration suits outdoor service. Protect moisture-sensitive sheets independently rather than treating the rack finish as weather protection for inventory. Load plaques should describe capacities for the supplied arrangement so operators can check both arm limits and upright totals. Moving arms or adding levels can alter the allowable configuration. Keep identification visible, and route proposed changes through a configuration review before material is returned to the affected positions. Longest-load turning path Arm and upright capacities Indoor or outdoor exposure Call (704) 480-3833: (704) 480-3833 ## Recent Installations Racking projects completed for warehouses across the Charlotte metro and nearby North and South Carolina communities. Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/9e6d591a-1b42-4328-8d0c-3ff129072082/project-orange-blue-rack.jpg) Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/e271d582-2fce-4cff-97da-462ddab27097/project-blue-tall-rack.jpg) Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/ec5ca081-4183-457a-914c-fb74a5815fa2/project-dc-aisle.jpg) Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/9bee7a3e-6b3b-4d2b-8863-c37f0e1dd966/project-distribution-center.jpg) Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/880d5178-c293-49a2-82ae-3365f0c1628c/project-drive-in.jpg) Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/91e4b43a-9eb0-4105-9d30-657028a00c91/project-loaded-aisle.jpg) Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/e1312ce4-7800-4267-82fd-dd273b917f2a/project-igt-install.jpg) Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/259a43d6-5be8-4f8e-920d-5c0dcdcf44a4/project-wire-deck.jpg) Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/aa0a820f-d334-4983-9a3f-a2435e8bb4aa/project-shelving-bays.jpg) Image: Pallet rack installation (https://charlottepalletrack.com/__l5e/assets-v1/b572c5bc-8d66-4163-afa0-d13a2eb10eef/project-green-orange-rack.jpg) View More Projects: https://charlottepalletrack.com/projects ## Price the actual handling requirement As a division of Warehouse Equipment & Supplies Co., we have been supplying and installing since 1997. Send inventory measurements and an aisle sketch for a cantilever rack proposal covering new components, layout considerations and coordinated installation. (704) 480-3833. ### Charlotte Pallet Rack 1515 Mockingbird Ln Ste 200A Charlotte, NC 28209 (704) 480-3833 Monday - Friday: 8:00 AM - 6:00 PM ## Charlotte long-stock storage questions ### Can one row hold pipe and sheet packs? ### How do we handle partial bundles? ### Should our Charlotte forklift aisle match the pallet aisles? ### Can we load both faces to the same weight? ## Other Rack Types We Supply in Charlotte ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://charlottepalletrack.com/service-area/charlotte ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://charlottepalletrack.com/service-area/charlotte/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://charlottepalletrack.com/service-area/charlotte/pallet-flow-rack ### Drive-In Rack Deep reserve lanes with forklift entry for repeated pallets, trading individual access for fewer aisles. View details https://charlottepalletrack.com/service-area/charlotte/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://charlottepalletrack.com/service-area/charlotte/carton-flow-rack Warehouse Relocation in Charlotte →: https://charlottepalletrack.com/service-area/charlotte/warehouse-relocation ## Nearby Areas We Also Serve For facilities near Northlake or the CLT Airport cargo corridor, share receiving routes and long-load destinations so storage planning reflects the building's actual freight flow. Cantilever Rack in Concord: https://charlottepalletrack.com/service-area/concord/cantilever-rack Cantilever Rack in Gastonia: https://charlottepalletrack.com/service-area/gastonia/cantilever-rack Cantilever Rack in Huntersville: https://charlottepalletrack.com/service-area/huntersville/cantilever-rack Cantilever Rack in Mooresville: https://charlottepalletrack.com/service-area/mooresville/cantilever-rack Cantilever Rack in Matthews: https://charlottepalletrack.com/service-area/matthews/cantilever-rack Cantilever Rack in Monroe: https://charlottepalletrack.com/service-area/monroe/cantilever-rack View All Service Areas: https://charlottepalletrack.com/service-area ## Where We Work Located in Charlotte, NC, we serve the entire Charlotte metro with industrial pallet racks and warehouse storage solutions. ### Charlotte Pallet Rack #### Address 1515 Mockingbird Ln Ste 200A Charlotte, NC 28209 #### Phone (704) 480-3833 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Cantilever Rack in Charlotte? Call (704) 480-3833 with material sizes, bundle weights and handling-equipment details to discuss cantilever storage rack options. (704) 480-3833 Tap to Call: (704) 480-3833 ## Structured data ```json [ { "@context": "https://schema.org", "@graph": [ { "@type": "LocalBusiness", "@id": "https://charlottepalletrack.com/#business", "name": "Charlotte Pallet Rack", "url": "https://charlottepalletrack.com", "telephone": "(704) 480-3833", "address": { "@type": "PostalAddress", "streetAddress": "1515 Mockingbird Ln, Ste 200A", "addressLocality": "Charlotte", "addressRegion": "NC", "postalCode": "28209", "addressCountry": "US" }, "hasMap": "https://maps.google.com/maps?cid=3791448016980164287&output=embed", "areaServed": { "@type": "City", "name": "Charlotte", "containedInPlace": { "@type": "State", "name": "North Carolina" } }, "parentOrganization": { "@type": "Organization", "name": "Warehouse Equipment & Supplies Co.", "url": "https://www.warehouseequipmentsite.com" } }, { "@type": "Service", "@id": "https://charlottepalletrack.com/service-area/charlotte/cantilever-rack#service", "name": "Cantilever Rack in Charlotte, NC", "serviceType": "Cantilever Rack in Charlotte, NC", "description": "Plan Charlotte long-material storage around load weights, arm spacing and forklift access. Call (704) 480-3833 for new rack and installation.", "url": "https://charlottepalletrack.com/service-area/charlotte/cantilever-rack", "provider": { "@id": "https://charlottepalletrack.com/#business" }, "areaServed": { "@type": "City", "name": "Charlotte", "containedInPlace": { "@type": "State", "name": "North Carolina" } } } ] }, { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://charlottepalletrack.com/#business", "name": "Charlotte Pallet Rack", "alternateName": "Charlotte Pallet Rack - A Division of Warehouse Equipment & Supplies Co.", "description": "Industrial pallet racks and warehouse racking solutions in Charlotte, NC. Free warehouse design consultations, pallet rack installation, and storage optimization services across the Charlotte metro.", "url": "https://charlottepalletrack.com", "telephone": "(704) 480-3833", "address": { "@type": "PostalAddress", "streetAddress": "1515 Mockingbird Ln, Ste 200A", "addressLocality": "Charlotte", "addressRegion": "NC", "postalCode": "28209", "addressCountry": "US" }, "geo": { "@type": "GeoCoordinates", "latitude": "35.2271", "longitude": "-80.8431" }, "areaServed": { "@type": "City", "name": "Charlotte", "containedInPlace": { "@type": "State", "name": "North Carolina" } }, "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "17:00" } ], "priceRange": "$$", "paymentAccepted": "Cash, Credit Card, Check", "image": "https://charlottepalletrack.com/images/logo.png", "sameAs": [ "https://facebook.com/charlottepalletrack", "https://linkedin.com/company/charlottepalletrack", "https://instagram.com/charlottepalletrack" ], "hasOfferCatalog": { "@type": "OfferCatalog", "name": "Pallet Rack Systems", "itemListElement": [ { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Selective Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Push Back Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Drive-In Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Warehouse Design Consultation" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Pallet Rack Installation" } } ] } }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://charlottepalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://charlottepalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Charlotte", "item": "https://charlottepalletrack.com/service-area/charlotte" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://charlottepalletrack.com/service-area/charlotte/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can one row hold pipe and sheet packs?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, when the supports suit both products. Sheet packs may need an approved supported surface; pipe needs measures appropriate to its rolling tendency. Separate locations make capacity checks and retrieval clearer." } }, { "@type": "Question", "name": "How do we handle partial bundles?", "acceptedAnswer": { "@type": "Answer", "text": "Assign positions that still provide enough support for the remaining pieces. Do not leave short cutoffs bridging an unsuitable span merely because the original full-length bundle fitted there." } }, { "@type": "Question", "name": "Should our Charlotte forklift aisle match the pallet aisles?", "acceptedAnswer": { "@type": "Answer", "text": "Not automatically. Check the longest carried load through turns and intersections, plus truck and attachment requirements. A long bundle can need substantially different clearance from a pallet." } }, { "@type": "Question", "name": "Can we load both faces to the same weight?", "acceptedAnswer": { "@type": "Answer", "text": "Only within the specified double-face configuration. Confirm individual arm ratings, each face's loading arrangement and the upright total rather than assuming the opposite face provides unrestricted additional capacity." } } ] } ] ```